Ordered on request
Award winning Watercooling Water Chillers from Hailea.
New cool design
More robust materials for even longer lifespan
Lowered noise emissions, Quieter than a standard refrigerator!
Suitable for continuous operation
This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! This system is also great for no-noise applications as the chiller can be located in another room.
We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation.
To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware.
CPU: 80W (standard) to 150W (overclocked)
GPU: 20W (small cards) to 150W (current models such as 8800)
MB: 10 to 20W per component
The added values of your system must not exceed the given cooling capability of the chiller.
Please Note: To use standard 1/4" thread fittings the following adaptor is required: Connection adaptor for Ultra-waterchiller 300 500 1500 to G1/4" Thread, this can be selected from the options below.
|Model Number ||HC-500A |
|Power ||1/2 Horsepower|
|Power consumption ||375W|
|Cooling Capacity ||790W (suitable for extreme OC and cooling)|
|Recommended coolant flow ||1200-3000 l/h|
|Cooling agent ||R134A|
|Dimensions (LxWxH) ||475x360x490mm|
|Heat exchanger material ||Titanium|
|Temperature adjustments |
Digital read-out (precision 0,1°C)
Temperature setting in 1°C steps
|Contents ||1 x Chiller|
4 x 1" fittings (2 straight, 2 right angled)
Note for first-time users:
If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product!
Note for aquarium-use:
The cooling performance is affected by the aquarium-lamp, the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the chiller at least on the power-lever higher than theoretically calculated.