||Kaze Master II KM05-BK
|Number of Fan Channels
||1x 4-pin Molex
|Max Watts Per Channel
|Fan Speed Range
||0 - 9,990 rpm (Display: 30 rpm Steps)
|Number of Temperature Channels
||4 (0 - 100°C / 32 - 199.9°F)
||1 x 5.25" Drive Bay
||Controls up to 4 Fans
Capable of Temperature Monitoring
LCD Front Panel Readout
1x Kaze Master II KM05-BK
4 x 3 Pin Fan Extension Cables
4 x Temperature Sensor Cabes
Adhesive Tape for Temp Sensors
4 x Mounting Screws
The Kaze Master II is an updated version of the Kaze Master.
Just like the original Kaze Master the II version shows the RPM of each connected fan and the temperature of the four supplied probes.
One thing we are often asked about the fan controllers we sell, is whether they can switch the fan(s) off when their dials are turned down to the minimum setting. The Kaze Master Ace can! So if you only want a fan to run under certain circumstances then this could be your ideal fan controller.
As already mentioned, each fan controller is supplied with four temperature probes. These probes connect to the rear of the fan controller and are then placed inside the PC. The best locations to place these probes depends on which component(s) you wish to monitor. The most common choices are the CPU and the graphics card, so by slotting the probe between the heatsink fins you are then able to monitor how hot the heatsink runs.