The Kaze Master Flat is designed to be installed into a 5.25" bay. As protruding control knobs would interfere with front doors of computer cases (preventing their closure), the Kaze Master Flat does not suffer from this problem making it ideal for use in a case that uses a door to hide the 5.25" drive bays.
As with most Scythe fan controllers, the Kaze Master Flat can control either standard 3-pin fans or 4-pin PWM fans making it easy to control all the fans in the PC case, including the CPU fan.
The Kaze Master Flat's discreet LCD-display provides the user with information about the temperature and the rpm's for each of the four fans. The display is neatly arranged and can be switched off at the user's convenience.
The adjustable voltage range is between 3.7 to 12 volts. Some fans have problems starting up at lower voltages so to get around this in the lower ranges, the unit will start all fans at 12v to ensure that they start correctly. Once spinning, the voltage is lowered to the user-defined setting.
By setting the dip-switch at the back of the unit, the user is able to set the desired temperature for the alarm to go off. The values can be set between 55 °C and 90 °C in 5-degree steps.
|Number of Fan Channels
|Max Watts Per Channel
|Fan Speed Range
||Variable due to Fan
|Number of Temperature Channels
||0 to 100°C
||5v or 12v from PC Power Supply
||1 x 5.25" Drive Bay
||148.5 x 42 x 83 mm
||Controls up to 4 Fans
Capable of Temperature Monitoring
LCD Front Panel Readout
Flat Front Design
||1 x Scythe Fan Controller
4 x 3 pin 300mm Extension Cables
4 x 300mm Air Temperature Probes
4 x Mounting Screws