The pump is completely plug-and-play, and connects directly to any computer power-supply through standard 4 pin power connectors.
It's compact design, quiet and powerful motor make it ideally suited for heavy duty cooling in environments where space is at a premium.
The standard top can be replaced with one of our aftermarket laing tops to allow you to fit any size tube fitting you require.
The DDC pump also comes with a 3 Pin RPM Sensor Wire, this can be connected to a 3 pin motherboard header (usually the CPU fan header) to report on rotational speed via the Bios or Freeware such as Speedfan.
From here you can set a low RPM warning level so if the speed of the pump drops it will safely close down your PC.
| Model |
| Manufacturer |
Laing |
| Model Number |
DDC-1T+ Ultra 18W |
| Specification |
| Maximum Flow Rate |
600lph |
| Connection Size |
3/8" ID Barbs |
| Power Connection |
4 Pin Molex |
| Power Input |
18w |
| Delivery Head |
4.7m |
| Voltage |
12v |
| Maximum Temperature |
60° C |
| Weight |
220g |
| Dimensions (WxLxH) |
62 x 62 x 38mm without connections |
| Special Features |
3 pin RPM Monitoring Sensor Wire
Small Form Factor
Near Silent Operation
Standard Pump Top Can Be Replaced With Aftermarket Top |
