The system is based on a disk pack with 21 copper pipes from the factory and pressed stainless steel flanges. On both sides of the plate pack are Delrin terminals that seal against the stainless steel flanges and are bolted to these.
The Delrin terminals are recessed for the connecting thread and have a round socket. In this case, a connection adapter can be connected to two radiators mounted without the hassle of using hose connections to directly connect the radiators.
Having determined the orientation of the radiators with each other, the coolant flows through one side next to each other when the radiators are connected in series, horizontally stacked radiators are traversed in parallel. In addition, the system can grow indefinitely in length. Optional modules connect the Delrin disc packs together.
The single circuit design allows the entire radiator to be used for one loop. Optional delrin end plates will be available optionally to split into a dual circuit allowing the same radiator to be used for multiple loops. This is an industry first.
A full range of options and accessories are available and are listed in the table below.
||AMS 240 Single Circuit 33006
|Number of Ports
|Fan Mounting Points
||Double Sided - Fans can be mounted either side
|Fan Screw Thread Size
|Fins Per Inch
Stainless Steel Frame
Delrin Modular Ends
|Bleed Valve Screw
||284 x 146 x 63 mm
||1 x Aquacomputer AMS 240 Single Circuit Radiator
4 x 1/4" Thread Blanking Plugs