The second version of the Alphacool Repack Dual Bayres 5,25" is now available.
The Alphacool Repack Dual Bayres 5,25" - Rev.2 is designed for installation in the front of an enclosure.
Two vacant 5.25” drive bays are needed. By default, the connection of in- and Outlet can be achieved via ¼” threaded openings. Additionally Alphacool offers the possibility to use 3/8” threads for reduced flow resistance. Of course all four openings can also be used parallel, e.g. to allow installation of a second cooling loop.
Unlike most reservoirs, where the coolant is sent around multiple corners, still leaving micro-bubbles in the coolant, this reservoir utilizes a new technology: Both In- and Outlet openings are equipped with a special filter which eliminates even the smallest bubbles in the coolant.
Filling has always been a hassle with standard slot-in reservoirs: Unscrew, pull out, fill, push in and tighten screws again. Enough of this! The front of this reservoir has a filling straw which can be taken out by unscrewing it. As it is hollow, it can now be used for filling of the reservoir. We recommend using a filling bottle or funnel from our portfolio.
||Repack Dual Rev.2
||2 x 1/4"
2 x 3/8"
||91 x 148 x 84 mm
|Drive Bay Mountable
||Front Mounted Fillport
Filter to Remove Bubbles
Pre Drilled for up to 6 x 5mm LED's (LED's not included)
Mount for 10cm Cathode
||1 x Alphacool Reservoir
2 x 3/8" Thread Blanking Plugs
6 x Mounting Screws